Warranty & Conditions

โ‘  Order Made ยท Edition ๋ชจ๋“  ์ฃผ๋ฌธ ์ œ์ž‘ ์ œํ’ˆ์€ ๊ธˆ์† ์˜ต์…˜, ์‚ฌ์ด์ฆˆ, ๊ฐ์ธ ๋“ฑ ์„ธ๋ถ€ ์˜ต์…˜์— ๋”ฐ๋ผ ๊ฐœ๋ณ„ ์ œ์ž‘๋ฉ๋‹ˆ๋‹ค. ์ œ์ž‘ ๊ณผ์ •์— ๋“ค์–ด๊ฐ„ ์ดํ›„ ๊ณ ๊ฐ์˜ ๋‹จ์ˆœ ๋ณ€์‹ฌ์— ์˜ํ•œ ์ฃผ๋ฌธ ์ทจ์†Œ ๋ฐ ํ™˜๋ถˆ์€ ์–ด๋ ต์Šต๋‹ˆ๋‹ค. (์ผ๋ถ€ ์ œํ’ˆ์— ํ•œํ•˜์—ฌ ์ถ”๊ฐ€ ๋น„์šฉ ๊ฒฐ์ œ ํ›„ ์‚ฌ์ด์ฆˆ ์ˆ˜์„ ๋งŒ ๊ฐ€๋Šฅํ•ฉ๋‹ˆ๋‹ค. ์ˆ˜์„ ์€ 1ํšŒ์— ํ•œํ•˜์—ฌ ์ œํ’ˆ์˜ ๊ธฐ์กด ํ˜•ํƒœ๋ฅผ ํ›ผ์†ํ•˜์ง€ ์•Š๋Š” ์„ ์—์„œ ๊ฐ€๋Šฅํ•ฉ๋‹ˆ๋‹ค. ์‚ฌ์ด์ฆˆ ์กฐ์ ˆ์ด ๋ถˆ๊ฐ€ํ•œ ๋””์ž์ธ์˜ ๊ฒฝ์šฐ, ์ƒˆ ์ œํ’ˆ ๊ตํ™˜ ๋ฐ ์ˆ˜๋ฆฌ ๋ชจ๋‘ ๋ถˆ๊ฐ€ํ•ฉ๋‹ˆ๋‹ค.)

โ‘ก In Stock ยท Edition ์ผ๋ถ€ ์‚ฌ์ด์ฆˆ์— ํ•œํ•ด ์ œ์ž‘๋˜์–ด ๋‹น์ผ ๋ฐœ์†ก๋ฉ๋‹ˆ๋‹ค. ์žฌ๊ณ  ์†Œ์ง„ ํ›„์—๋Š” ์ฃผ๋ฌธ ์ œ์ž‘์œผ๋กœ ์ „ํ™˜๋˜์–ด ์ œ์ž‘ ๊ธฐ๊ฐ„์ด ์†Œ์š”๋  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ๋ถ€์ฃผ์˜์— ์˜ํ•œ ํŒŒ์†, ๊ธํž˜ ๋“ฑ ๊ณ ๊ฐ ๊ณผ์‹ค๋กœ ์ธํ•œ ์ˆ˜๋ฆฌ๋Š” ์ˆ˜์„ ๋น„๊ฐ€ ๋ฐœ์ƒํ•˜๋ฉฐ ๊ตํ™˜/๋ฐ˜ํ’ˆ ๋Œ€์ƒ์ด ์•„๋‹™๋‹ˆ๋‹ค.

โ‘ข ์ผ๋ฐ˜ ์‚ฌํ•ญ ์ œํ’ˆ์„ ์ฐฉ์šฉํ•˜๊ธฐ ์ „์— ์ œ๊ณต๋œ ์ทจ๊ธ‰ ์ฃผ์˜์‚ฌํ•ญ์„ ํ™•์ธํ•ด ์ฃผ์„ธ์š”. ๊ตฌ๋งค์ผ๋กœ๋ถ€ํ„ฐ 1๋…„ ์ด๋‚ด์— ์ œํ’ˆ ์ž์ฒด์˜ ๊ฒฐํ•จ์œผ๋กœ ์ธํ•œ ํŒŒ์†์ด ๋ฐœ์ƒํ•  ๊ฒฝ์šฐ ๋ฌด์ƒ ์ˆ˜๋ฆฌ๋ฅผ ์ œ๊ณตํ•ฉ๋‹ˆ๋‹ค. ์†Œ๋น„์ž ๊ณผ์‹ค๋กœ ์ธํ•œ ํŒŒ์†์€ ๋ณด์ฆ ๊ธฐ๊ฐ„๊ณผ ์ƒ๊ด€์—†์ด ์œ ์ƒ์œผ๋กœ ์ง„ํ–‰๋ฉ๋‹ˆ๋‹ค. ๋„๊ธˆ ์ œํ’ˆ์ด๋‚˜ ๋ณ€์ƒ‰์ด ์ง„ํ–‰๋œ ์ œํ’ˆ, ์„ธํŒ…๋œ ์›์„์˜ ๊นจ์ง ๋“ฑ์€ ์œ ์ƒ ์ˆ˜๋ฆฌ์— ํ•ด๋‹นํ•ฉ๋‹ˆ๋‹ค. ๊ธˆ์†์ด๋‚˜ ์ฒœ์—ฐ ์†Œ์žฌ(์›์„, ๊ฐ€์ฃฝ, ์šฐ๋“œ ๋“ฑ)์˜ ํŠน์„ฑ์ƒ ๋ฏธ์„ธํ•œ ํ ์ง‘์ด ์žˆ์„ ์ˆ˜ ์žˆ์œผ๋ฉฐ, ์ด๋Š” ๋ถˆ๋Ÿ‰ ์‚ฌ์œ ๊ฐ€ ๋˜์ง€ ์•Š์Šต๋‹ˆ๋‹ค. ์ˆ˜์ž‘์—… ์ œ์ž‘ ๊ณต์ •์ƒ ๋‹ค์Œ๊ณผ ๊ฐ™์€ ์ž์—ฐ์Šค๋Ÿฌ์šด ํ˜„์ƒ์ด ์žˆ์„ ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

(1) ์ž‘์—… ์ค‘, ๊ธˆ์† ํ‘œ๋ฉด์„ ๊นŽ์•„ ๋“ค์ด๊ฑฐ๋‚˜ ๊ตฌ๋ถ€๋ฆฌ๋Š” ๊ณผ์ •์—์„œ ์ƒ๊ธฐ๋Š” ๋ฏธ์„ธํ•œ ๊ธํž˜ ๋ฐ ์ฐํž˜ ํ˜„์ƒ
(2) ์€๋•œ ์‹œ ์—ด์„ ๊ฐ€ํ•˜๋ฉด์„œ ์ƒ๊ธฐ๋Š” ๊ธฐํฌ(๊ธฐํฌ ์ž๊ตญ)
(3) ๋„๊ตฌ๊ฐ€ ๋‹ฟ์ง€ ์•Š๋Š” ์ข์€ ๋ฉด์ด๋‚˜ ๊ณก์„ ์˜ ๋ฏธ์„ธํ•œ ์ž๊ตญ
(4) ์œ ํ™” ์ฒ˜๋ฆฌ ๋ฐ ๊ด‘ํƒ ์ž‘์—… ์‹œ ์ƒ‰์ƒ์˜ ๋ฏธ์„ธํ•œ ์ฐจ์ด
(5) ๋™์ผํ•œ ๋””์ž์ธ์˜ ์ œํ’ˆ ๋‚ด์—์„œ๋„ ๋ฏธ์„ธํ•˜๊ฒŒ ๋‹ค๋ฅธ ํ˜•ํƒœ์˜ ์ฐจ์ด

Warranty & Conditions

โ‘  Order Made ยท Edition Each order-made piece is individually produced according to the selected metal composition, size, engraving, and other custom option choices. Once production has begun or the piece has been completed, cancellations or refunds due to change of mind cannot be accepted. For certain ring designs, a size adjustment may be available at an extra cost, provided the structure of the piece allows modification without damage. Size adjustment is limited to one time only within approximately ยฑ 1 size and will be carried out by resizing the original piece rather than replacing it with a new product. The availability of resizing may vary depending on the design and structural characteristics of the jewellery.

โ‘ก In Stock ยท Edition This category includes pieces that are not dependent on size selection. These items are produced in limited quantities. If stock is depleted, additional production time may be required. Changes to design or dimensions beyond the available options are not possible. Due to the delicate nature of jewellery, pieces showing signs of wear, scratches, or damage caused by improper handling may not be eligible for exchange or refund.

โ‘ข General Conditions Please review the product characteristics and handling guidelines provided with the product before use. If a manufacturing defect or functional issue is identified within one year from the date of purchase, complimentary repair will be provided as a priority. If repair is not possible, the product may be replaced or refunded. Damage resulting from normal use may be subject to paid repair regardless of the warranty period. Products showing signs of misuse or those exceeding the warranty period may not be eligible for repair. (Plated rings, oxidation caused by individual, scratches) are not the responsibility of the brand. Due to the nature of metals and natural materials (including leather, wood, gemstones, and fabric), slight variations may occur from piece to piece. As each item is produced through handcraft processes rather than industrial manufacturing, the following characteristics may naturally occur and are not considered defects:

(1) Slight scratches or indentations created during metal planing or shaping, bending wires, and lines
(2) Small air bubbles or surface pits formed during the casting process
(3) Minor tool marks in areas difficult to reach during finishing
(4) Residual polishing compound or dark oxidation marks in recessed areas
(5) Subtle differences in shape or surface detail between pieces of the same design